VU+ Duo 2 HD Satellite Receiver
Features:
- 2 x Plug & Play tuner slots (1x Twin DVB-S/S2 Tuner Module included)
- Transcoding function
- Airplay function
- Opera browser
- HbbTV
- HDMI 1.4 connection
- HD PIP
- Gigabit Lan
- Plug and Play support for 2.5 "SATA - Hard Drives
- 2 x display (VFD and LCD)
Technical highlights VU + Duo2
- 1300 MHz dual-core MIPS processor
- 1GB Flash
- 2GB DDR3 DRAM
- Gigabit Lan
- 2 x DVB Common Interface slot
- 2 x Smartcard-Reader (Xcrypt)
- 3 x USB (1 x front, 2 x back)
- SPDIF audio output optical (digital)
- 1 x HDMI 1.4 video / audio output (digital)
- 1 x Scart (TV)
- 1 x RCA video output
- 2 x audio output (L / R) RCA (analog)
- Plug and Play support for 2.5 and 3.5 "SATA - Hard Drives
- unlimited channel lists for TV / Radio
- EPG (electronic program guide) support
- Support of Bouquet lists
- OSD in many languages and skin-support
- automatic / manual channel search
- DiSEqC 1.0/1.1/1.2, USALS
- Power switch
Specifications VU + Duo2
DVB-S2 and DVB-S2 Dual Tuner:
- Input Frequency Range 950 .. 2150 MHz
- QPSK Demodulation EN 302 307
- Signal Level - 65 dBm ... - 25 dBm
- Noise Level 12 dB max.
- DBS-Tuner Input Connector F-Type female
- Input impedance 75 ohms
- AFC capture range + / - 3 MHz
- Demodulation Shaped QPSK and 8PSK
- Viterbi and Reed-Solomon FEC
- Viterbi rates 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
- Roll-off Factor 35%
DVB-C/T- hybrid tuner:
- VHF channels: 2-12 (49 .. 230 MHz)
- UHF channels: 21-69 (470 .. 861 MHz)
- DVB-C HDTV compatible
- Input frequency range: 51 .. 858 MHz
- Symbol rate: 1 ... 7 Mbaud / s
- Input Impedance: 75 ohms
- Tuner In / Out connector: IEC
- DVB-C / DVB-T can be selected via software
Common interface:
- 2x Common Interface Power Consumption max. 0.35 A/5V
Video decoder:
- Video Compression MPEG-2 / H.264 and MPEG-1 compatible
- Video Standard PAL G / 25 Hz, NTSC
- Video Formats 4:3 / 16:9
- Letterbox for 4:3 TV-Device
Output digital:
- Output Level 0,5 Vss on 75 Ohm
- Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
- S / PDIF-Output optical, coaxial (AC3)
- Audio decoder:
- Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main / sub), Stereo
- Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22:05 kHz, 24 kHz
Output analog:
- Output Level L / R 0,5 Vss on 600 Ohm
- THD> 60 dB (1 kHz)
- Crosstalk <-65 dB
Video parameter:
- Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm
TV-Scart:
- Output: FBAS, RGB, over OSD selectable
Ethernet:
- 1000/100/10 MBit compatible interface
USB:
- USB 2.0 connector (3x)
LNB power and DVB-S2 tuner:
- LNB Current 400mA max. , Short-circuit proof
- LNB Voltage horizontal "no load 19.5V" 17,6 V at 400mA
- LNB Voltage vertical "no load 14.5V" 11,8 V at 400mA
- LNB is switched off in standby mode
Control of the satellite position:
- DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control
Power consumption:
- <15W (in operation, with LNB)
- <13W (in operation, without LNB)
- <0.5 W (Deep-Standby-Mode)
Input voltage:
- 230V / 50 Hz alternating current + / - 15%
- 110V / 60 Hz alternating current + / - 15%
General:
- Ambient Temperature +15 ° C. .. +35 ° C
- Humidity <80%
- Dimensions (W x D x H): 380 mm x 290 mm x 60 mm
- Weight: 3,0 kg without HDD
NOTE: Features listed here may require additional and/or periodic firmware updates. We are not responsible for third party firmware and features, addons, patches, softcams, plugins or third party services and the availability of such services on this receiver (such as YouTube, etc.). Your warranty covers receiver hardware only and is not extended to software updates or setup, we may however extend this at our discretion to offer support for FTA (free to air) reception where the service provider permits connection to their network. Further details can be found in our Terms and Conditions
Features:
- 2 x Plug & Play tuner slots (1x Twin DVB-S/S2 Tuner Module included)
- Transcoding function
- Airplay function
- Opera browser
- HbbTV
- HDMI 1.4 connection
- HD PIP
- Gigabit Lan
- Plug and Play support for 2.5 "SATA - Hard Drives
- 2 x display (VFD and LCD)
Technical highlights VU + Duo2
- 1300 MHz dual-core MIPS processor
- 1GB Flash
- 2GB DDR3 DRAM
- Gigabit Lan
- 2 x DVB Common Interface slot
- 2 x Smartcard-Reader (Xcrypt)
- 3 x USB (1 x front, 2 x back)
- SPDIF audio output optical (digital)
- 1 x HDMI 1.4 video / audio output (digital)
- 1 x Scart (TV)
- 1 x RCA video output
- 2 x audio output (L / R) RCA (analog)
- Plug and Play support for 2.5 and 3.5 "SATA - Hard Drives
- unlimited channel lists for TV / Radio
- EPG (electronic program guide) support
- Support of Bouquet lists
- OSD in many languages and skin-support
- automatic / manual channel search
- DiSEqC 1.0/1.1/1.2, USALS
- Power switch
Specifications VU + Duo2
DVB-S2 and DVB-S2 Dual Tuner:- Input Frequency Range 950 .. 2150 MHz
- QPSK Demodulation EN 302 307
- Signal Level - 65 dBm ... - 25 dBm
- Noise Level 12 dB max.
- DBS-Tuner Input Connector F-Type female
- Input impedance 75 ohms
- AFC capture range + / - 3 MHz
- Demodulation Shaped QPSK and 8PSK
- Viterbi and Reed-Solomon FEC
- Viterbi rates 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
- Roll-off Factor 35%
- VHF channels: 2-12 (49 .. 230 MHz)
- UHF channels: 21-69 (470 .. 861 MHz)
- DVB-C HDTV compatible
- Input frequency range: 51 .. 858 MHz
- Symbol rate: 1 ... 7 Mbaud / s
- Input Impedance: 75 ohms
- Tuner In / Out connector: IEC
- DVB-C / DVB-T can be selected via software
- 2x Common Interface Power Consumption max. 0.35 A/5V
- Video Compression MPEG-2 / H.264 and MPEG-1 compatible
- Video Standard PAL G / 25 Hz, NTSC
- Video Formats 4:3 / 16:9
- Letterbox for 4:3 TV-Device
- Output Level 0,5 Vss on 75 Ohm
- Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
- S / PDIF-Output optical, coaxial (AC3)
- Audio decoder:
- Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main / sub), Stereo
- Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22:05 kHz, 24 kHz
- Output Level L / R 0,5 Vss on 600 Ohm
- THD> 60 dB (1 kHz)
- Crosstalk <-65 dB
- Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm
- Output: FBAS, RGB, over OSD selectable
- 1000/100/10 MBit compatible interface
- USB 2.0 connector (3x)
- LNB Current 400mA max. , Short-circuit proof
- LNB Voltage horizontal "no load 19.5V" 17,6 V at 400mA
- LNB Voltage vertical "no load 14.5V" 11,8 V at 400mA
- LNB is switched off in standby mode
- DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control
- <15W (in operation, with LNB)
- <13W (in operation, without LNB)
- <0.5 W (Deep-Standby-Mode)
- 230V / 50 Hz alternating current + / - 15%
- 110V / 60 Hz alternating current + / - 15%
- Ambient Temperature +15 ° C. .. +35 ° C
- Humidity <80%
- Dimensions (W x D x H): 380 mm x 290 mm x 60 mm
- Weight: 3,0 kg without HDD
NOTE: Features listed here may require additional and/or periodic firmware updates. We are not responsible for third party firmware and features, addons, patches, softcams, plugins or third party services and the availability of such services on this receiver (such as YouTube, etc.). Your warranty covers receiver hardware only and is not extended to software updates or setup, we may however extend this at our discretion to offer support for FTA (free to air) reception where the service provider permits connection to their network. Further details can be found in our Terms and Conditions
