(100) 6mm X 50mm Thunderbolts
- Product SKU: V44321
- Category: PlutoDirect|Satellite & TV||PlutoDirect|Satellite & TV|Installation|Installation|Screws - Bolts - Plugs

(100) 6mm x 50mm THUNDERBOLTS
(100) 6mm x 50mm THUNDERBOLTS
Self Tapping Anchor(Ideal)
(100) 6mm x 50mm THUNDERBOLTS
Manufactured to the highest technical standards for complete reliability the hardened Thunderbolt is a self-tapping anchor for use in a variety of construction materials including concrete, stone, brick and block. This self-tapping action enables a positive and safe anchorage to be achieved, with the substrate becoming the nut to the Thunderbolt.
- Simple to install
- Uses standard size hammer or percussion drill bits
- Safe anchorage achieved without the need of high ightening forces
- Can be removed and re-fixed into same hole, providing thread is correctly aligned
- No expansion forces means close to the edge fixing and reduced centre spacing distances
Boxed: x100
Drill diameter: 6mm
Max. fixing thickness: 20mm
Min. embedment depth: 30mm
Over drill depth: 10mm
Hole clearance: 8mm
Anchor length: 50mm
Head size A/F: 10mm
Maximum tightening torque: 15Nm for Digi Dish)
(100) 6mm x 50mm THUNDERBOLTS
(100) 6mm x 50mm THUNDERBOLTS
Self Tapping Anchor(Ideal)
(100) 6mm x 50mm THUNDERBOLTS
Manufactured to the highest technical standards for complete reliability the hardened Thunderbolt is a self-tapping anchor for use in a variety of construction materials including concrete, stone, brick and block. This self-tapping action enables a positive and safe anchorage to be achieved, with the substrate becoming the nut to the Thunderbolt.
- Simple to install
- Uses standard size hammer or percussion drill bits
- Safe anchorage achieved without the need of high ightening forces
- Can be removed and re-fixed into same hole, providing thread is correctly aligned
- No expansion forces means close to the edge fixing and reduced centre spacing distances
Boxed: x100
Drill diameter: 6mm
Max. fixing thickness: 20mm
Min. embedment depth: 30mm
Over drill depth: 10mm
Hole clearance: 8mm
Anchor length: 50mm
Head size A/F: 10mm
Maximum tightening torque: 15Nm for Digi Dish)